DATE | HS_CODE | Product Description | Trademark | Country | Net Weight | Statistical Cost | Place | Shipper Name | Consignee Name |
---|
2017-10-26 | 7215508000 | Superalloy RODS unalloyed steel C45 + C ANSWER further worked than HARDENING drawing, circular cross-CARBON CONTAINING MORE THAN 0.25 MSS.%, INTENDED FOR USE AS RAW MATERIAL FOR PRODUCTION | STALMA | POLAND | 11345 | 10193,49 | LUBLIN | ***** | ***** |
2017-10-26 | 7215501900 | Superalloy RODS unalloyed steel C20 + C, without further treatment, EXCEPT HARDENING drawing, circular cross-CARBON CONTAINING LESS 0.25 MSS.%. INTENDED FOR USE AS RAW MATERIALS FOR THE PRODUCTION | STALMA | POLAND | 1982 | 1780,83 | LUBLIN | ***** | ***** |
2017-10-26 | 7215100000 | RODS Cold Drawn Non-alloy free-cutting steel, not further worked than STRENGTHENING drawing. INTENDED FOR USE AS RAW MATERIALS FOR THE PRODUCTION OF AUTOCOMP. | STALMA | POLAND | 4922 | 4853,15 | LUBLIN | ***** | ***** |
2017-10-30 | 7215508000 | Superalloy RODS unalloyed steel MARKS C45 + C, calibrated circular section have bevels on both sides, made in accordance with EN 10083 / EN-10277 / EN-10278 | STALMA | POLAND | 20320 | 18222,34 | LUBLIN | ***** | ***** |
2017-11-09 | 7215508000 | Superalloy RODS unalloyed steel C45 + C, without further treatment, EXCEPT HARDENING drawing, circular cross-CARBON CONTAINING MORE THAN 0.25 MSS.%, INTENDED FOR USE AS RAW MATERIAL FOR PRODUCTION | STALMA | POLAND | 13369 | 12188,01 | LUBLIN | ***** | ***** |
2017-11-09 | 7215501900 | Superalloy RODS unalloyed steel C20 + C DALNEYSHEY WITHOUT TREATMENT BUT HARDENING drawing, circular cross-CARBON CONTAINING LESS 0.25 MSS.%. INTENDED FOR USE AS RAW MATERIALS FOR THE PRODUCTION | STALMA | POLAND | 1374 | 1259,88 | LUBLIN | ***** | ***** |
2017-11-09 | 7215100000 | RODS Cold Drawn Non-alloy free-cutting steel, not further worked than STRENGTHENING drawing. INTENDED FOR USE AS RAW MATERIALS FOR THE PRODUCTION OF AUTOCOMP. | STALMA | POLAND | 4900 | 4947,49 | LUBLIN | ***** | ***** |
2017-11-25 | 7604210000 | Shaped profiles of aluminum alloy, hollow (closed) NOT PERFORATED for manufacturing aluminum windows, doors Material composition in percentage terms ALUMINUM 98.0% Magnesium 1.5% silicon 0.5%: | ALIPLAST | *** | 1292.73 | 9037,69 | LUBLIN | ***** | ***** |
2017-11-25 | 7604299000 | Shaped profiles of aluminum alloys, not hollow (open) NOT PERFORATED for manufacturing aluminum windows, doors, chemical composition of the material as a percentage of 98.0% Aluminum Magnesium 1.5% silicon 0.5%: | ALIPLAST | *** | 259.72 | 1933,53 | LUBLIN | ***** | ***** |
2017-11-27 | 7907000009 | ARTICLES OF HOLDERS TSIHKA__1.0__ two-level shelving units, made of an alloy of zinc and aluminum powder coated. MATERIAL FABRICATION 10/17/215/3 (ZN AL4CU1) Composition of: AL-4.1%, CU-1%, FE-0.01%, MG-0.045%, NI-0.001%, PB-0.003%, ZN-rest | WITHOUT A TRADEMARK | POLAND | 22.9 | 1132,9 | LUBLIN | ***** | ***** |