DATE | HS_CODE | Product Description | Trademark | Country | Net Weight | Statistical Cost | Place | Shipper Name | Consignee Name |
---|
2017-10-04 | 7304399209 | Tubes of circular cross section, of unalloyed steel, external diameter not exceeding 168.3MM, ISP. AS Spare parts for maintenance and repair previously imported hydraulic excavators HITACHI: | HITACHI | JAPAN | 12.96 | 247,34 | TOKYO | ***** | ***** |
2017-10-05 | 7304318009 | SEAMLESS TUBE circular cross-section of unalloyed steel, NICKEL-FREE, nominal diameter 20 mm, cold drawn (cold reduction), SPID. AS Spare parts for predictive maintenance and repair of hydraulic | SUNNIX | JAPAN | 0.09 | 12,11 | TOKYO | ***** | ***** |
2017-10-05 | 9607201000 | Parts of slide fasteners MOLNY - Sliders for slide fasteners MOLNY BRASS ALLOY | *** | JAPAN | 42.6 | 687,86 | TOKYO | ***** | ***** |
2017-10-10 | 7325999009 | Cast articles of iron or steel - PLUG PART YA00033971-12SHT, DATA-SLEEVE SPECIAL shape with several rectangular holes of structural alloyed steel. Required for mounting the cutter bucket. connects with | HITACHI | *** | 42.36 | 413,62 | TOKYO | ***** | ***** |
2017-10-12 | 7304318009 | SEAMLESS TUBE circular cross-section of unalloyed steel, NICKEL-FREE, nominal diameter 20 mm, cold drawn (cold reduction), SPID. AS Spare parts for predictive maintenance and repair of hydraulic | TOKYO SUNNIX | JAPAN | 0.18 | 42,48 | TOKYO | ***** | ***** |
2017-10-13 | 7325999009 | SPARE PARTS FOR CONSTRUCTION AND ROAD ENGINEERING - SLEEVE BUCKET ARTICLE 4244836-2SHT, heat-resistant low-alloy steel material, manufacturing methods, casting, for excavators HITACHI | HITACHI | JAPAN | 10.86 | 332,45 | TOKYO | ***** | ***** |
2017-10-18 | 8431492000 | Part of your excavator ALLOY STEEL - CUTTING EDGE PART 4646804-2SHT, characteristics- purpose - cutting elements BUCKET TECHNOLOGY HITACHI. METHOD OF MANUFACTURING - cast component followed by mechanical and thermal treatment. Mounted on | HITACHI | *** | 27.12 | 111,2 | TOKYO | ***** | ***** |
2017-10-18 | 8431492000 | Part of your excavator ALLOY STEEL - CUTTING EDGE PART 4646804-2SHT, characteristics- purpose - cutting elements BUCKET TECHNOLOGY HITACHI. METHOD OF MANUFACTURING - cast component followed by mechanical and thermal treatment. Mounted on | HITACHI | *** | 27.12 | 111,2 | TOKYO | ***** | ***** |
2017-10-26 | 7211233000 | Rolled iron or non-alloy steel, width 600 mm, clad, without further treatment, KR.HOLODNOY rolling (cold reduction) containing less than 0.25 wt.% Carbon, the thickness of 0.35 mm or greater. | *** | JAPAN | 3.95 | 421,09 | TOKYO | ***** | ***** |
2017-10-27 | 8431492000 | Part of your excavator ALLOY STEEL - PLATE ARTICLE KC4165620120-2SHT wear resistance, characteristics- LOWER PROTECTION Excavator Bucket HITACHI mechanical wear, STEEL CASTING. Is bolted to the bottom of the bucket ADAPTER ARTICLE 4350767-40SHT | HITACHI | *** | 1519 | 10029,49 | TOKYO | ***** | ***** |