| DATE | HS_CODE | Product Description | Trademark | Country | Net Weight | Statistical Cost | Place | Shipper Name | Consignee Name |
|---|
| 2017-11-01 | 7601208009 | PRIMARY ALUMINUM ALLOY tensile strength of AT LEAST 240MPA T200S AND LESS IN 415MPA T25S MARK A356.2 (SR) FINE ingots lost in route to the procedures REEKPORTA IN F / D Transportation in RF TERRITORY | *** | RUSSIA | 6791 | 7292,76 | KAMYSHTA | ***** | ***** |
| 2017-11-02 | 7601208009 | ALUMINUM ALLOY PRIMARY ALB5, SHAPED wafer ingots, CHEMICAL COMPOSITION: B (BOR) 5.17%, FE (IRON) 0.15%, SI (silicon) 0.08%. It is used as an alloying additive in the manufacture of aluminum alloys in the aluminum industry. | *** | CHINA | 20549.5 | 73074,02 | VLADIVOSTOK | ***** | ***** |
| 2017-11-13 | 7601208009 | Addition alloy aluminum alloy ingots Wafer AS ALV10, is used as an alloying additive in the production of aluminum alloys .: CHEM. COMPOSITION - AL: 88,86-89,80%; V: 9,9-10,8%; FE: 0,12-0,15%; SI: 0,18-0,19% | *** | NETHERLANDS | 1500 | 10033,5 | ST PETERSBURG | ***** | ***** |
| 2017-11-14 | 7601208009 | PRIMARY ALUMINUM ALLOY untreated, into ingots for use in the foundry industry | MTX | *** | 1000 | 6036,98 | Rubano | ***** | ***** |
| 2017-11-14 | 7601208009 | PRIMARY ingots of cast aluminum alloys ALTI5B1 (TITAN 4.94%, boron 1.02%, 0.289% impurity, ALUMINUM 93.751%) - 2000 kg. WEIGHT ingot 1.6-1.8 kg, length 0.5 meters. For alloying aluminum alloys. | ABSENT | CHINA | 2000 | 6424 | ST PETERSBURG | ***** | ***** |
| 2017-11-14 | 7601208009 | ALUMINUM ALLOY PRIMARY MARK A356.2 (SR) - 86kg, ALSI7MG - 10kg, BAR | *** | RUSSIA | 96 | 195,12 | Sayanogorsk | ***** | ***** |
| 2017-11-14 | 7601208009 | Addition alloy of aluminum alloy ALB5, a tensile strength less than 240 MPa at T = 200 degrees C less than 415 MPa at T = 25 degrees C. - Wafer chushka weight from 7 to 8 kg WITH B (BOR) RT 4.71 to 5.44%, FE (IRON) RT 0.119 to 0.174%, SI ( | *** | CHINA | 20558.5 | 73106,03 | VLADIVOSTOK | ***** | ***** |
| 2017-11-24 | 7601208009 | PRIMARY ALUMINUM ALLOYS untreated form of a rectangular wafers, the size 45H190H450MM density MIN 2.6 g / cm3, CHEMICAL COMPOSITION%: AL-93.19-94.08, B 5.7-6.5, SI 0.07-0.12, FE-0.12-0.16, .PROCHEE <0.03 are used in | ABSENT | SPAIN | 9741 | 51207,46 | SARANSK | ***** | ***** |
| 2017-11-24 | 7601208009 | Addition alloy of aluminum alloy ALB5, a tensile strength less than 240 MPa at T = 200 degrees C less than 415 MPa at T = 25 degrees C. - Wafer chushka weight from 7 to 8 kg WITH B (BOR) RT 4.78 to 5.47%, FE (IRON) RT 0.137 to 0.230%, SI ( | *** | CHINA | 20518 | 74808,63 | VLADIVOSTOK | ***** | ***** |
| 2017-11-27 | 7601208009 | Addition alloy ALMN25 WAFFLES PLASTINY- 2875KG. TC 01-136-2017. ARTICLE 0000875. PARTY NA001517702. PRESENTS ingot aluminum alloy. Chemical Composition: MN-24,45%; SI-0,19%; FE-0,16%; OTHER <0.10%; AL-APPROXIMATELY 75.1%. LABELING: ONE AND ORANGE | ABSENT | THE EUROPEAN UNION | 2875 | 9508,13 | Belaya Kalitva | ***** | ***** |