DATE | HS_CODE | Product Description | Trademark | Country | Net Weight | Statistical Cost | Place | Shipper Name | Consignee Name |
---|
2017-09-14 | 8207301000 | Interchangeable tools bending press. It is attached to the bending beam presses. PREPARATION steel sheet is positioned between the punches and dies. The punch is lowered into the die and blank acquires a certain corner. MATERIAL - | EURAM | ITALY | 670 | 7726,96 | PARMA | ***** | ***** |
2017-09-20 | 8466103800 | ANCHORAGES working tools (punches and dies) for sheet bending metal-working press: BODY typeholder With shims. ALL PIECES 8: TP TOOLING SRL TP TOOLING TP TOOLING 981,418 ADAPTER MODUFIX H = 100 L = 100 | *** | ITALY | 38 | 1222,82 | *** | ***** | ***** |
2017-09-20 | 8466103800 | ANCHORAGES working tools (punches and dies) for sheet bending metal-working press: BODY typeholder With shims. ALL PIECES 6: GIMEC SLR GIMEC GIMEC PORTALAMA PL5 CON CUNEO H150 L150 SENZA STAFFA PO | *** | ITALY | 37 | 871,01 | *** | ***** | ***** |
2017-09-21 | 4009220009 | HOSE CONNECTION upper die 600x600, of vulcanised rubber, reinforced with a steel cord with fittings at both sides CIRCULATION OIL isostatic punches HYDRAULIC PRESS FOR FORMING CERAMIC 3608L: made, according to | *** | ITALY | 6.5 | 239,82 | *** | ***** | ***** |
2017-09-21 | 4009220009 | HOSE CONNECTION upper die 600x600, of vulcanised rubber, reinforced with a steel cord with fittings at both sides CIRCULATION OIL isostatic punches HYDRAULIC PRESS FOR FORMING CERAMIC 3608L: made, according to | *** | ITALY | 6.5 | 239,82 | *** | ***** | ***** |
2017-10-05 | 8466103800 | Tool holder - the holder of the punch, die, is a steel housing part for holding tools (punch, die) for stamping on a coordinate-punch presses Metal Processing TM MATRIX ": | TRADEMARK NO | ITALY | 8.17 | 1197,58 | ST PETERSBURG | ***** | ***** |
2017-10-05 | 8466103800 | Tool holder - the holder of the punch, die, is a steel housing part for holding tools (punch, die) for stamping on a coordinate-punch presses Metal Processing TM MATRIX ": | TRADEMARK NO | ITALY | 8.17 | 1197,58 | ST PETERSBURG | ***** | ***** |
2017-10-17 | 8466103800 | ANCHORAGES Interchangeable tools (punch, die), is a steel structure-borne. DETAILS FOR RETENTION, direction of the tool when performing punching on a coordinate-punch presses Metal Processing: | TRADEMARK NO | ITALY | 11.2 | 2490,73 | San Giuliano Milanese | ***** | ***** |
2017-10-17 | 8466103800 | ANCHORAGES Interchangeable tools (punch, die), is a steel structure-borne. DETAILS FOR RETENTION, direction of the tool when performing punching on a coordinate-punch presses Metal Processing: | TRADEMARK NO | ITALY | 11.2 | 2490,73 | San Giuliano Milanese | ***** | ***** |
2017-10-24 | 8466103800 | Tool holder - the holder of the punch, die, is a steel housing part for holding tools (punch, die) for stamping on a coordinate-punch presses Metal Processing TM MATRIX ": | TRADEMARK NO | ITALY | 5.99 | 773,31 | ST PETERSBURG | ***** | ***** |