DATE | HS_CODE | Product Description | Trademark | Country | Net Weight | Statistical Cost | Place | Shipper Name | Consignee Name |
---|
2017-09-06 | 7318220009 | WASHER STEEL WITHOUT THREAD FOR HYDRAULIC ENGINE LINDE HMV280-02, designed to ensure the proper clearance between the parts REGULATOR hydraulic motors, slots groove, slot extending, NO HOLES: | LINDE | GERMANY | 0.001 | 0,21 | VILNIUS | ***** | ***** |
2017-09-06 | 7320208108 | Steel springs, runs on compressed MADE cold process (winding) for the hydraulic motor LINDE HMV280-02.PREDNAZNACHENY TO RETURN VALVE REGULATOR MOTOR In the initial position: | LINDE | GERMANY | 0.008 | 16,6 | VILNIUS | ***** | ***** |
2017-10-02 | 7326909807 | BAR CONNECTION FOR REGULATORS GOK, TYPE FL 92-4 - 40 pieces in the box of the pallet ON. | ABSENT | GERMANY | 4.8 | 134,92 | LUEBECK | ***** | ***** |
2017-10-12 | 7318165000 | ACCESSORY pneumatic systems for applying a protective or decorative coatings (high-pressure PAINTING "AIRLESS"): LOCKNUT MOUNTING air regulator to the panel painting devices. | WIWA | GERMANY | 0.01 | 1,23 | LAHNAU | ***** | ***** |
2017-10-15 | 7320202009 | Coil springs of carbon steel, hot-PROCESSED, zinc coated using compressed INTENDED FOR USE IN THE COMPOSITION OF GAS PRESSURE REGULATOR (pressure reducing valves) TYPE HON330, used in the system | ABSENT | GERMANY | 4.9 | 365,12 | KASSEL | ***** | ***** |
2017-10-15 | 7326909807 | Mounting cone made of an alloy steel by TURNING FROM THE TERMS USED IN ASSEMBLY OF GAS PRESSURE REGULATORS TYPE HON AS A TOOL FOR PROPER ORIENTATION couples are going PARTS "saddle-valve": | ABSENT | GERMANY | 1.35 | 659,96 | KASSEL | ***** | ***** |
2017-10-15 | 7318220009 | The supporting disc (10004898) - STEEL basic washer, with a nominal inner diameter 15mm, outer diameter 180MM.1SHT. Is designed to fix the springs on the surface of the membrane IN THE COMPOSITION OF GAS PRESSURE REGULATOR (pressure reducing valves) TYPE | ABSENT | GERMANY | 1.2 | 103,48 | KASSEL | ***** | ***** |
2017-10-16 | 7326909409 | PARTS KIT PARTS FOR GAS PRESSURE REGULATOR TYPE MR50 PN5 / 6 SAV USSA 73021939 and the type MR50 PN10 73020317: ARTICLES OF STAINLESS STEEL PRESSED: The valve disk is designed to create the desired output PRESSURE REGULATOR | ABSENT | GERMANY | 0.5 | 403,27 | NIZHNY NOVGOROD | ***** | ***** |
2017-10-24 | 7320208108 | Helical compression spring steel wire. Designed to change the outlet pressure Regulators of pressure of gas. | MEDENUS | GERMANY | 0.5 | 112,26 | OLPE GERMANY | ***** | ***** |
2017-10-24 | 7326909409 | STEEL Stampings REGULATOR LOAD (RPN) power transformers. | MR | GERMANY | 1.1 | 416,79 | MOSCOW | ***** | ***** |