DATE | HS_CODE | Product Description | Trademark | Country | Net Weight | Statistical Cost | Place | Shipper Name | Consignee Name |
---|
2017-09-04 | 3926909709 | PLASTIC PRODUCTS: Repair kits for piston pneumatic valves: O-ring (rubber) -6SHT, the gasket (rubber) 2 pcs, paronitovye gasket (rubber reinforced asbestos) 1pc, 1pc-steel springs, stainless steel valve cover, 1pc, drowning | *** | ITALY | 3.17 | 1705,68 | *** | ***** | ***** |
2017-09-04 | 3926909709 | PLASTIC PRODUCTS: Repair kits for piston pneumatic valves: O-ring (rubber) -6SHT, the gasket (rubber) 2 pcs, paronitovye gasket (rubber reinforced asbestos) 1pc, 1pc-steel springs, stainless steel valve cover, 1pc, drowning | *** | ITALY | 3.17 | 1705,68 | *** | ***** | ***** |
2017-09-06 | 8481309908 | VALVES (NON-RETURN): CHECK VALVE (NON-RETURN) FROM POLYMERIC MATERIAL, WITH SPRING STAINLESS STEEL COI. FOOD FOR MANUFACTURING CONTAINERS 20-30 TI-liter bottles (kegs) for beverages PETAINER CZECH HOLDINGS SRO PETAINER A54301103 | *** | ITALY | 1801.8 | 40473,21 | *** | ***** | ***** |
2017-10-04 | 7326909807 | QUICK RELEASE SPRING SUSPENSION SENSOR - is a device made of stainless steel, which allows you to mount the sensor for flaw detection on the scanning device. Used in conjunction with the ultrasonic flaw detection to detect defects in | IMG ULTRASUONI | ITALY | 0.6 | 1581,89 | MANDELLO DEL LARIO | ***** | ***** |
2017-10-05 | 8481401000 | RELIEF VALVE SPRING, SERIES SMU-7000, maximum allowable working pressure PN 16 MPA NOMINAL DIAMETER: INLET DN 1 1/2 "(40MM), OUTLET DN 3" (80MM), MATERIAL Stainless Steel ASTM A351 CF8M (MN - 1.5%, CR - 18- | ABSENT | ITALY | 384 | 62577,8 | TOLYATTI | ***** | ***** |
2017-10-05 | 8481401000 | RELIEF VALVE SPRING, SERIES SMU-7000, maximum allowable working pressure PN 16 MPA NOMINAL DIAMETER: INLET DN 1 1/2 "(40MM), OUTLET DN 3" (80MM), MATERIAL Stainless Steel ASTM A351 CF8M (MN - 1.5%, CR - 18- | ABSENT | ITALY | 384 | 62577,8 | TOLYATTI | ***** | ***** |
2017-10-05 | 7320202009 | SPRING - SPIRAL, runs on compressed STAINLESS STEEL, manufacturing methods of plastic deformation in metals followed by hot way are intended to bias compression of the shaft thereby providing TENSION Ploen | TRADEMARK NO | ITALY | 0.04 | 478,04 | BREMEN | ***** | ***** |
2017-10-05 | 7318220009 | SHAYBA- PRODUCT WITHOUT THREAD STAINLESS STEEL are made by stamping. OD - 20 mm, inner diameter - 14 mm. It does not have any elements of a design. Designed to provide support spring. Tensile strength of 400 MPa | TRADEMARK NO | ITALY | 0.001 | 8,60 | BREMEN | ***** | ***** |
2017-10-09 | 8487909000 | CUFF (end seals: the outer, inner steel ring of stainless steel SPRING STEEL MAKES load to the sealing member that the next swing shaft; sealing elements of FPM is applied to the outer ring THROUGH | KLINGER | ITALY | 8 | 1795,89 | SYKTYVKAR | ***** | ***** |
2017-10-09 | 8487909000 | CUFF (end seals: the outer, inner steel ring of stainless steel SPRING STEEL MAKES load to the sealing member that the next swing shaft; sealing elements of FPM is applied to the outer ring THROUGH | KLINGER | ITALY | 8 | 1795,89 | SYKTYVKAR | ***** | ***** |