DATE | HS_CODE | Product Description | Trademark | Country | Net Weight | Statistical Cost | Place | Shipper Name | Consignee Name |
---|
2017-11-27 | 7318157009 | Bolts of fastening of the eccentric - BOLT THREAD HEX HEAD of stainless steel, not self-cutting, thickness of the rod 6 mm. It contains no additional items DESIGN. A tensile strength of 3.6. Spare part | TRADEMARK NO | UNITED STATES | 0.54 | 10,86 | PLYMOUTH | ***** | ***** |
2017-11-27 | 7325999009 | LEVER - is a cast cast steel with stiffening ribs, supports, through-holes. Spare part for mold system ULTRA-LINE 26 meat processing used to transmit motion from the regulator to the working bodies | TRADEMARK NO | UNITED STATES | 6.35 | 321,82 | PLYMOUTH | ***** | ***** |
2017-11-27 | 7318163009 | GAYKA- of stainless steel, with an internal thread with a hole diameter 12 mm. It contains no additional items DESIGN. A tensile strength of 3.6. Spare part for mold system ULTRA-26 processing lines | TRADEMARK NO | UNITED STATES | 0.3 | 7,37 | PLYMOUTH | ***** | ***** |
2017-11-27 | 7318290009 | PIN - PRODUCT WITHOUT THREAD CYLINDRICAL SHAPE OF IRON OR STEEL galvanized, thickness of the rod 6 mm. It contains no additional items DESIGN. Tensile strength 3,6.PREDNAZNACHEN MOUNT guide plates (IPT pushers | TRADEMARK NO | UNITED STATES | 0.01 | 1,98 | PLYMOUTH | ***** | ***** |
2017-11-27 | 7326909807 | RAIL - represents STAINLESS STEEL STRIPS staple RETENTION OF IRON METAL Anticorrosive coating, with a through threaded hole MANUFACTURED BY MECHANICAL PROCESSING. Spare part for FOUR | TRADEMARK NO | UNITED STATES | 32.72 | 3029,48 | PLYMOUTH | ***** | ***** |
2017-11-27 | 7326909807 | SPACER - Stainless steel rectangular shape with a circular hole, the manufacture by stamping followed by machining. Designed to control the height of the connector STRAP DRIVE PLATE. CHA is a replacement | TRADEMARK NO | UNITED STATES | 0.01 | 37,86 | PLYMOUTH | ***** | ***** |
2017-11-27 | 7318220009 | WASHER - products without thread, made of stainless steel, contains no additional items DESIGN. OD - 30 mm, diameter of holes of 10 mm. A tensile strength of at least 300 MPa. Designed to provide reasonable | TRADEMARK NO | UNITED STATES | 0.58 | 35,21 | PLYMOUTH | ***** | ***** |
2017-11-27 | 7326909807 | BASE is a product of rectangular shape with a through hole, the method of construction machined from stainless steel. INTENDED FOR FIXING PLUG FOR cylinder rods. Spare part for molding SI | TRADEMARK NO | UNITED STATES | 21.19 | 1218,08 | PLYMOUTH | ***** | ***** |
2017-11-27 | 7325999009 | Block is a rectangular block of stainless steel with threaded holes THROUGH fabricated by casting with subsequent machining. PLUG is designed to fasten the lever. Spare part for SHAPED | TRADEMARK NO | UNITED STATES | 0.4 | 66,72 | PLYMOUTH | ***** | ***** |